Skip to content

Filter Posts by Tags in WordPress Dashboard

At the top of the WordPress All Posts page, there’s a drop-down which allows you to filter posts based on a category. One can however only filter by one category at a time, though it is possible to filter post by multiple categories by editing the URL.

Currently, however, no such drop-down exists for tags. Nevertheless, it’s still possible to filter posts based on tags using one of two methods:

  • Using the tags column
  • Using a tag filter URL

1. Filter Posts by Tags using the Tag Column

This will allow you to filter the posts by tags, but only one tag at a time. To filter by multiple tags, check the second option below.

  1. First, we need to enable the Tags column which is not displayed by default. In the All posts page, click the Screen Options tab, and put a check-mark on the Tag option then Apply.
    screen options
  2. Once the column is revealed, click on any tag to show only posts that have that tag.
    tags column
  3. To remove the filter, click on the All link just below the Posts title.

2. Filter Posts using a Tag Filter URL

You can also filter posts based tags by loading a URL in the following format:

https://www.yourdomain.com/wp-admin/edit.php?tag=tag

So for instance, if you want to show only posts that contain the tag WordPress, then you would load the following URL:

https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress

For a tag containing multiple words, use a hyphen to separate the words. e.g. for the tag WordPress Tutorials you would load:

https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress-tutorials

Use a plus sign to separate tags if you want to filter posts by multiple tags. For instance, to filter all posts that have the tags WordPress and Blocks, you’ll use:

https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress+blocks

Use the same principle to filter posts with three or more tags. However, please note that the plus sign here acts like an AND operator, which means the URL will load posts that contain both tags and not just one of them.

To show all posts that contain either of the tags use a comma instead of the plus as follows:
https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress,blocks

The comma here acts like the OR operator so it should load all posts that have any of the tags. WordPress will encode the comma to its Unicode equivalent (%2C) once it finishes loading. As such, you can also use %2C instead of the comma i.e.

https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress%2Cblocks

For both cases above, don’t forget to add hyphens for tags that contain multiple words, e.g.

https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress+gutenberg-blocks
https://www.yourdomain.com/wp-admin/edit.php?tag=wordpress%2Cgutenberg-blocks

Now, here’s a bonus trick for you: all the above also works for Categories, so you don’t have to be limited to filtering posts to just one category using the dropdown.

Tags:
Share:

Leave a Reply

Feel free to share your comments or questions with me. I may not be able to respond immediately so please check later once I've approved your comment.

Your email address will not be published. Required fields are marked *

Kelvin Kathia

Kelvin Kathia is a writer that's passionate about sharing solutions to everyday tech problems. He's the founder and editor of Journey Bytes, a tech blog and web design agency. Feel free to leave him comments or questions regarding this post, or by leaving him a message on the contact page. If you found his content helpful, a donation is much appreciated.